FRESH GRASS PL920

FRESH GRASS PL920

FRESH GRASS PL920

This is an excellent landscape product that offers thatch, which provides added body, reducing the amount of infill needed. The four color blend of this surface provides a truly authentic look and feel that resembles a natural lawn.

This product can be used for landscapes, pet areas, fringes, and much more. This product can be installed indoors or outdoors on concrete or a compacted aggregate base.

The inspection shall include a check for planarity. The finished surface shall not vary from a true plane more than 1/4” in 10 feet when measured in any direction. The Contractor shall provide all required tools and materials needed for the planarity check, which may include but not be limited to, a laser level, string line, straight edge and/or other assessment materials.

MORE ABOUT FRESH GRASS PL920

The Contractor shall mark in the field any deviations from grade in excess of those specified above, as well as provide a marked up plan locating the deviations. The Contractor shall correct any deviations to the satisfaction of the Engineer and Synthetic Turf installer.

The compaction of aggregate base shall be 95% to Standard Proctor and surface tolerances shall not exceed ¼” over 10 feet.

The Contractor shall have a state registered surveyor conduct an elevation survey of the area in a 25’ grid to determine and verify that subgrade elevations and slopes are within previously specified tolerances. This elevation survey may require further verification of smaller areas within the 25’ grid if determined necessary by the Engineer.

When any or all corrective procedures have been completed, the finished sub-base surface must be re-inspected, with the same representatives attending as the initial inspection. If required, additional repair and inspections are to be conducted until the subbase surface is deemed acceptable by the Engineer and Synthetic Turf Installer

Commencement of work under this section shall constitute acceptance of the work completed under other sections by the Contractor, acceptance of dimensions of the subbase, and hence, no claims for extra work based upon these conditions will be permitted.

Eco Friendly Turf

Comfortable and Soft

KoolMax Comfort Protection

Safe for Children and Pets

OUR WORK

  • Finished Pile Height: 1.5”(38mm)
  • Product Weight Total: 67 oz./yd2
  • Primary Backing Weight: 7.4 oz./yd2
  • Secondary Coating Weight: 20 oz./yd2
  • Fabric Weight: 15′(4.57m)
  • Tuft Gauge: 3/8”
  • Grab Tear Strength: 200-1b-F
  • Tuft Bind:  >10-1b-F
  • Infill(sand): 2lbs Silica Sand
  • Infill(rubber): N/A
  • Landscape
  • Pet Turf
  • Playground

GET A FREE QUOTE

    2023-05-17T09:32:00+00:00

    Title